Jiangsu Ahn Jin Rubber Co., Ltd.
Product Categories
newsYou are here: Home » news » Content
Rubber chord stop water band definition and scope of use
Edit: Jiangsu Ahn Jin Rubber Co., Ltd.Date: 2018-06-05

The rubber fender waterstop and the water-stop rubber are made of natural rubber and various synthetic rubbers. They are blended with various additives and fillers. After plasticating, mixing and pressing, they have many varieties and specifications. Bridge type, mountain type, P type, U type, Z type, B type, T type, H type, E type, Q type, etc. According to the use situation, it can be classified into buried rubber fender water stop belt and back type Rubber water stop.

The rubber fender uses the water-stopping material to have good elasticity, wear resistance, aging resistance and tear resistance, and is suitable for deformation and water resistance. The temperature range is -45°C-+60°C. When the temperature exceeds 70°C, and rubber waterstops are not subject to strong oxidation or attack by organic solvents such as oil. Rubber fenders must not be used. Used in underground structures, dams, reservoirs, swimming pools, roofing and other building materials. And the deformation joints of the structure are waterproof.
The following matters are as follows:
1 Rubber fenders should not be exposed to the sun for a long time to prevent rain and do not come into contact with highly polluting chemicals.
2 In the transportation and construction, prevent mechanical and steel damage to the water stop.
3 During the construction process, the waterstop must be securely fixed to avoid displacement during concrete casting and to ensure the correct position of the rubber fender waterstop in the concrete.
4 The method of fixing the rubber fender waterstop is: fixing with additional steel bars; fixing the special fixture; fixing the wire and the template, etc. If you need to pierce, you can only choose the edge installation area of the waterstop, and do not damage other parts.
5 When ordering the product, the user should calculate the length of the product according to the engineering structure and the rubber fender design drawing. The special-shaped structure should have the drawing description. Try to connect the waterstop in the factory to [1][2] as a whole. , can use electric heating plate vulcanization bonding or cold bonding (rubber waterstop) or welding (plastic waterstop).